Bitumen Products
The primary use of bitumen is in road construction, where it is used as the glue or binder mixed with aggregate particles to create asphalt concrete. Its other main uses are for bituminous waterproofing products, including production of roofing felt and for sealing flat roofs.
 
 Tarfelt
The primary use of bitumen is in road construction,
where it is used as the glue or binder mixed with aggregate particles to create asphalt concrete.
Its other main uses are for bituminous waterproofing products,
including production of roofing felt and for sealing flat roofs.
Technical Specifications:
Sr. No. Test/Characteristic Specification
01 Breaking Strength, min. kg  
A. Wrap Way 135
B. Weft Way 90
02 Pliability Test A. Roll should not show cracks on unrolling.
B. No surface rupture exceeding 5 mm.
03 Storage Sticking Layer should be capable of being separated without damage.
04 Pressure Head Should not leak.
05 Heat Resistant Bitumen compound should not melt.
06 Water Absorption 2 % max.
 
 Pot Hole Repair

Pothole Repair is a ready-to-use pre-mix bituminous mixture which is manufactured for permanent use and repairs of tar-sealed roads or pathways.

Pothole Repair is an all weather road repair that is effective in temperatures ranging from -26C to 49C.
This ready to use pre-mix bituminous mixture is manufactured from selected aggregates and bitumen using a co-polymer process which creates a tenacious bonding material.
Pothole Repair is unique because it is a permanent repair with the ability to expand and contract with the road's surface.
The curing process of Pothole Repair is activated by impact and it will bond to asphalt, concrete, steel and even wood.

Pothole Repair's application is five times faster than normal and the repair can be opened to traffic immediately

Size - 20kg

Directions for Use


Remove all loose debris from the pothole or damaged pavement. With a shovel, apply enough Matrex to crown the patched area. Tamer with the back of the shovel, plate compactor or wheel roll with the tyres of a vehicle.

For holes 15cm deep or more, apply In 5-7cm layers, compacting Matrex each time.

On conventional utility cuts or when Matrex is being applied over disturbed sub base aggregates, it is necessary to compact the base as you would in any standard pavement repair application.

Simply apply Matrex and compact with a plate tamper or a rubber wheeled asphalt roller. Matrex may be overlaid with conventional hot mix asphalt and is completely compatible.

Once applied, Matrex takes traffic immediately and requires no setting time due to the tenacious bond of the Instant Pothole Repair Patch.
About Autosign
 
Services
 
Contact Us
 
 
© Copyright 2011 : www.autosignindustries.com All right's Reserved by Autosignindustries
Powered by :